The mesh network OA2630 is a battery operated spread spectrum wireless outdoor air temperature and humidity sensor with a naturally ventilated 8-Plate Solar Radiation Shield to protect the sensor from precipitation and solar radiation.

If needed the distance from the sensor to the receivers can be extended using the Trs RR2552 repeater.

Trs Systems mesh network Series 2000 wireless sensors utilize reliable Spread Spectrum Radio technology. They can be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing installation labor risks.

The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the sensor during installation. There is no need for special wireless installation equipment or tool.

Together with the Trs Systems Series 2000 receivers and controllers , the Trs Systems wireless sensors can be used with any LON, BacNet, MODbus, or DDC control system or panel.

The maximum radio transmission distance is dependent on building type. The maximum open air line-of-sight transmission distance is one mile. In a typical commercial building with steel I-beam construction, concrete floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically through floors and horizontally through 150 to 500 feet of walls, furniture and air.

Input Voltage:
  Battery - One or two type 3.0V LiMNO2 1400 mAH (e.g. Duracell DL123A)

  8.25” x 7.25” x 10.75”

Operating Conditions:
  Temperature -40 to 160 deg F
  Humidity 0 to 100% RH non-condensing

Sensing Accuracy:
  +/- 1 degree F
  +/- 3% RH (10 to 90% RH)

Open Field Range:
  One mile line of sight

  UV Stabilized Thermoplastic Plates
  UV Resistant NEMA 4 Case White

Transmitter Characteristics:
  Center Transmit Frequency 923.58 MHz
  Transmitter Power - 11 dB

  FCC certified