The FT2630 is a battery operated spread spectrum wireless immersion temperature sensor for fluid temperature applications.
The sensor is encapsulated in a 0.25” OD 304 stainless steel probe. The sensor assembly has a 1⁄2” NPT fitting to be mounted into the thermowell. Thermowells with brass or 304 stainless steel materials are available for different fluid applications.
Trs Systems mesh network Series 2000 wireless sensors utilize reliable Spread Spectrum Radio technology. They can be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing installation labor risks.
The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the sensor during installation. There is no need for special wireless installation equipment or tool.
Together with the Trs Systems Series 2000 receivers and controllers , the Trs Systems wireless sensors can be used with any LON, BacNet, MODbus, or DDC control system or panel.
Input Voltage:
Battery - One type 3.0V LiMNO2 1400 mAH (e.g. Duracell DL123A, Varta CR123A)
Dimensions:
Probe lengths: 2”, 4” , 6”, 8” & 12”
Housing : 1-3/4” x 3-1/8” x 4-5/8”
Sensor fitting: ½” NPT
Operating Conditions:
Temperature 0 to 160 deg F
Humidity 5 to 95% RH non-condensing
Open Field Range:
One mile line of sight
Temperature Sensor:
Sensing Ranges: 0 to 200 deg F
Accuracy +/- 1 F
12 Bit Resolution
Transmitter Characteristics:
Center Transmit Frequency 923.58 MHz
Transmitter Power - 11 dB
Approvals:
FCC certified