 |
|
Wireless System Overview Multiple Sensor Transmitters Can Be Used Per Receiver/Controller |
|
|
| Wireless Products |
| Sensor Signal Transmitters | ||||||
| Wall Mount Temperature & Humidity |
Duct Mount Temperature & Humidity |
Immersion / Strap-On & Remote Temperature |
Outside Air Temperature & Humidity |
Analog / Digital Signal Input Transmitter |
Energy Monitors & Totalizers |
High Temperature Sensors |
 |
 |
 |
 |
 |
 |
|
| Product Literature WT1630A,B,C.pdf WH1630A,B.pdf (3%) WH1630C,D.pdf (2%) |
Product Literature DT1630A.pdf DH1630A,B,C.pdf (3%) DH1630D,E,F.pdf (2%) DT1650A.pdf |
Product Literature FT1630A.pdf SST1630A,B,C.pdf |
Product Literature OA1630A, OT1630A, OH1630A.pdf OST1630A.pdf |
Product Literature RT1630A,B,C,D.pdf RT1620A.pdf |
Product Literature EM2200A,B.pdf |
Product Literature FT3630A,B,C,S.pdf SST3630A.pdf |
| 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum | 900 MHZ Spread Spectrum |
| Suitable for churches, museums
and historical buildings Building retrofit applications in older buildings and hotels Office environments where work spaces are changed frequently Difficult installations where relocation of sensors is needed to optimize system performance Easy and non-intrusive installation of monitoring systems for energy retrofit/analysis |
Works in virtually all
difficult to wire building applications Fast installation in Mechanical Rooms - eliminates the need for conduit Humidity and temperature data allows DDC Controller to calculate Enthalpy / Dew Point Easy to relocate and install to fix tough applications Four point wireless averaging sensor has a 20 ft. flexible probe |
Easy to install Eliminates the need for conduit Suitable for use with multiple fluid types - Brass or Stainless thermowells available Works in virtually all difficult to wire building applications Wireless Refrigeration monitoring |
Suitable for use in all types
of DDC control applications Eliminates the need to penetrate through exterior building walls Can be mounted remotely from buildings One sensor can be used with multiple DDC controllers in different locations/buildings Easy to relocate Integral temperature and humidity sensors in a single unit eliminates the need for multiple sensors 8-plate solar shield ensures accurate outside air temperature readings Humidity and temperature data allows DDC Controller to calculate Enthalpy / Dew Point |
Remote wireless relay
applications where remote loads from a different building can be
controlled without trenching wires or conduit Suitable for use with a variety of duct, water, space, status and alarm sensors for monitoring and control Air Handling Unit applications where multiple duct sensors, status and alarms (OA, RA, MA, DA filter, freeze and fan status) can easily be picked up and transmitted to the panel without running wires or conduit Equipment monitoring applications where pumps, fans and alarm status can be picked up and transmitted to the panel without running wires or conduit Lighting applications where the occupancy sensors or lighting loads are located in an area remote from the controls such as a parking lot Wireless Chiller/Boiler monitoring. |
Totalizes power meter or
energy/flow meter for energy monitoring or sub-metering Accepts end of interval synchronization pulse for power demand calculations Suitable for use with power meters, BTU meters, flow meters |
NEMA4 Enclosure Suitable for industrial process temperature measurement , Easy to install Eliminates the need for conduit Suitable for use with multiple fluid types - Brass or Stainless thermowells available Works in virtually all difficult to wire building applications |
| Operating Voltage: Battery (3 V LiMnO2) Battery Life: Temperature Only 5+years Humidity Versions 3+years |
Operating Voltage: Battery (3 V LiMnO2) Battery Life: Temperature Only 5+years Humidity Versions 3+years |
Operating Voltage: Battery (3 V LiMnO2) Battery Life: Temperature 5+years |
Operating Voltage: Battery (3 V LiMnO2) Battery Life: Temperature Only 5+years Humidity Versions 3+years |
Operating Voltage: Battery (3 V LiMnO2) or 24 VAC Battery Only Models: RT1620B & RT1631 Battery Life: Standard Models 5+years |
Operating Voltage: 24 VAC |
Operating Voltage: Battery (3 V LiMnO2) Battery Life: 5+years |
| Operating Ambient: 32F to 104F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
Operating Ambient: -40F to 160F 5% to 95% RH (Non-Condensing) |
| Input: 20k NTC Thermistor (Included) Capacitive Humidity Element (Included) |
Input: 20k NTC Thermistor (Included) Capacitive Humidity Element (Included) |
Input: 20k NTC Thermistor (Included) |
Input: 20k NTC Thermistor (Included) Capacitive Humidity Element (Included) |
Input: (4) Analog - 20k NTC Thermistor, 0-10VDC, 0-5VDC (4) Digital-Relay Contacts RT1631A (1) Analog (0-10VDC) (1) Digital (Relay Contacts) RT1631B (2) Analog (20Kohm & 0-10VDC) |
Input: (2) Totalizer Inputs (3 bytes) 10 Hz Max (2) Digital |
Input: Platinum 1000 Ohm RTD (Included) |
| Output: RF Transmission of: Temperature (32F to 104F +/- 1F) Humidity (10% to 90% +/-3%) (30% to 80% +/-2%) Low Battery Indication Setpoint Models - Warmer/Cooler or 65F to 85F Occupancy Override Low Battery Indication |
Output: RF Transmission of: Temperature (-40F to 160F +/- 1F) (25F to 150F +/- 1F) Humidity (10% to 90% +/-3%) (30% to 80% +/-2%) Low Battery Indication |
Output: RF Transmission of: Temperature (0F to 200F +/- 1F) (25F to 125F +/- 1F) Low Battery Indication |
Output: RF Transmission of: Temperature (-40F to 160F +/- 1F) Humidity (10% to 90% +/-3%) Low Battery Indication |
Output: RF Transmission of: (4) Analog (20K Thermister 10K Thermister 1K RTD 0-5VDC 0-10VDC) (4) Digital (Relay Contacts) Low Transmitter Battery Indication RT1631A (1) Analog (0-10VDC) (1) Digital (Relay Contacts) RT1631B (2) Analog (20Kohm & 0-10VDC) Low Battery Indication |
Output: RF Transmission of: (2) Totalizer Count (2) Digital (Relay Contacts) Low Battery Indication |
Output: RF Transmission of: Temperature (0F to 250F) (-40F to 160F) (-100F to 1100F) Low Battery Indication |
|
|
||||||||||||||||||||||||||||||||||||||
Acrobat
Reader is required to view product specification (.pdf) files.
ฉ
2001-2005 Trs Systems, Inc., 601 Carlson Parkway, Suite 1050,
Minnetonka, MN 55305
Contact webmaster@trssys.com