MOD9200LON

The Series 2000 LonWorks® network transceiver utilizes reliable Spread Spectrum Mesh Network Radio technology. Together with other Trs wireless sensors and controls, the system can be used to transmit remote sensor readings, status/alarm indications, control signals and outputs wirelessly. It is compatible with control networks or automation systems that utilize LonWorks® communication protocol or interface. Up to 50 separate physical wireless sensor transmitters and/or wireless remote output (analog & digital) modules can be used with one MOD9200LON Transceiver and up to 100 data points and 100 wireless outputs can be monitored and controlled with one (1) MOD9200 Transceiver.

Input Power:
  24 VAC 60 Hz, 500 mA (nominal)

Dimensions:
  8.8” x 4.7” x 2.25”

Operating Conditions:
  Temperature 32 to 150 deg F
  Humidity 5 to 95% non-condensing

Case:
  Flame Retardant ABS Plastic (Black)
  UL Flame Rating – 94-5VA

Network Connections:
  Protocol – LonWorks®
  Physical Layer – FTT-10 (Free Topology Twisted Pair)
  Data rate – 78kbps

LonWorks® SNVTs Supported:
  Temperature: SNVT_temp_p
  Override Push Button: SNVT_occupancy
  Setpoint Adjustment: SNVT_temp_p
  Humidity: SNVT_lev_percent
  Sensor Status/Alarms: SNVT_count
  PPM: SNVT_ppm
  Digital output: SNVT_XXX
  Analog Output: SNVT_lev_percent

RF Characteristics:
  Operating Frequency Channel 902 – 928 MHz
  Receiver Sensitivity (avg. power) –110 dBm

Approvals:
  FCC Certified