The Series 2000 RT2630 wireless remote Analog/Digital Sensor Input Concentrator accepts digital and analog sensor/control inputs and transmits wirelessly to the receiver.

It utilizes reliable Spread Spectrum Mesh Network Radio technology. It can be installed easily in minutes eliminating hundreds of feet of wire and saving installation cost while reducing installation labor risks.

The Series 2000 sensor Data-Link LED confirms the data transmission was received by the receiver for fast and reliable positioning of the sensor during installation. There is no need for special wireless installation equipment or tool.

Together with the Trs Systems Series 2000 receivers and controllers, the Trs Systems wireless digital transmitter can be used with any LON, BACnet, MODbus, or DDC control system or panel.

The maximum radio transmission distance is dependent on building type. In a typical commercial building with steel I-beam construction, concrete floors with reinforcing rod, and metal stud walls, it can be expected that transmissions will penetrate vertically through floors and horizontally through 200 to 500 feet of walls, furniture and air.

Input Voltage:
  Battery Option - Size:2/3A, Type: Lithium
  3.0V 1400 mAh (e.g. Duracell DL123A)
  24 VAC 60 Hz or 24VDC Option

Operating Conditions:
  Temperature 15 to 125 deg F
  Humidity 5 to 95% RH non-condensing

Open Field Range:
  One mile line of sight

Digital Inputs (4):
  Contact Closure

Analog Inputs (4):
  Resolution – 12 bits
  Four 20 Kohm or Four 0 to 10 VDC or Four 0 to 20 mA

  Dimensions - 7.3” x 4.7” x 2.25”
  Flame Retardant ABS Plastic (Black)
  UL Flame Rating – 94-5VA

Transmitter Characteristics:
  Center Transmit Frequency 923.58 MHz
  Transmitter Power – 11 dB

  FCC certified